Vulkollan® and Neoprene Flat Wheels

Description
Vulkollan® and Neoprene Flap Wheels, consist of an aluminum machined hub from piece full or casted and then covered with lamellae of Vulkollan®R alterna- ted with lamellae of Neoprene. They are placed horizontally on the surface with an inclination that can change depending on the finishing result we want. More accentuated is the inclination, we have finest finishing and less noisy. With zero or little inclination, we have stronger cutting action of the belt and noisier wheel.

Sizes
Neoprene lamellae have standard thickness of 10 mm and a height of 20/25 mm, while those made of Vulkollan®, are available with a thickness of 5 mm and a height of 20/25 mm. The lamellae, normally, are assembled with a 2:1 ratio, that is, two Vulkollan® lamellae for each lamella of Neoprene. On request, we can produce wheels with lamellae of height 40/50/60 mm. We produce from 100 mm to 500 mm diameter wheels with width from 20 mm to 150 mm (on request even over) and with all bores

Field of use
These wheels are generally used for dry grinding of all metallic and non-metallic materials. Available with hardness Shore A from 10/15-20/25-30/35-40/45

How to use
The choice of hardness is a function of grain size and flexibility of the belt. A belt with a large grained tape (from 60 to 120) shows the maximum hardness while a belt with fine or very fine grained tape (320-400- 600) lists the minimum hardness.